Hello everyone. My names Chad. My wife Katie and I are refitting our newly acquired 1983 Hunter 34. The hull is in good shape but it's been on the hard for a few years and the cabin sole is rotten. and I can see the cabin is starting to crush into the compression post.
Currently we are ripping up the sole, and will be replacing any wiring under the floor. We will be cutting plywood and sealing it with epoxy or something... and then using some type up synthetic flooring most likely from Home Depot.
I'd like to tackle the false bilge issue. but currently the bilge is a block of ice due to our below freezing winters here in Halifax.
And if it interests you. You can follow along on out YouTube channel. We try to post weekly videos.
If you have any insight and experiences . We'd love to hear it.
-Chad
Currently we are ripping up the sole, and will be replacing any wiring under the floor. We will be cutting plywood and sealing it with epoxy or something... and then using some type up synthetic flooring most likely from Home Depot.
I'd like to tackle the false bilge issue. but currently the bilge is a block of ice due to our below freezing winters here in Halifax.
And if it interests you. You can follow along on out YouTube channel. We try to post weekly videos.
If you have any insight and experiences . We'd love to hear it.
-Chad
Attachments
-
92.2 KB Views: 856