Before I bring and install in the boat the new pieces of wood, I checked for leaking. I took a little bit more than 4 hours with my father to tighten all the rail bolts (joint of deck and hull) beaucause some were leaking.
I removed all the stanchions and made shims to redress them because some were fold.
In all cases, I use buthyl tape to seal all the potential leaking sources.
Now, no more water is entering in the cabin!
I don't have any pict for this step.
I removed all the stanchions and made shims to redress them because some were fold.
In all cases, I use buthyl tape to seal all the potential leaking sources.
Now, no more water is entering in the cabin!
I don't have any pict for this step.