h31

  1. S

    Rigging company's in Canada

    Good day, I have an '84 Hunter 31'. I believe the standing rigging is original and I would like to replace it. Does anyone know of any good companies in Canada I can contact to get some quotes? My boat has the Seldin rig. Also of note is that this boat has been exclusively sailed in the...
  2. Flip Rutledge

    H31 mast wire install

    I am trying to install a masthead wind sensor. Has anyone successfully installed a new wire through the mast step without removing the trim on the head door. I can get a fish tape in through the bottom, but it stops at the step. It seems the tube through the step does not line up well with the...
  3. P

    Hunter 31 waste tank PVC plumbing

    Just wanted to share a great modification to the Hunter 31 (1984) holding tank plumbing. About two years ago I replaced the hoses with top quality Trident and Poly-X (hard task because of the small space between the hull and the liner where three hoses need to pass in the space for two). While...
  4. Mark Nooney

    1984 H31 Deck Organizer

    HI all, Has anyone upgraded the scheafer deck organizers on the H31. I want to install a double stack in place of the original. If anyone has removed the organizer are the nuts embedded in the fiberglass? If they are it will make the modification a whole lot easier.Deck Organizer1 by Mark...
  5. C

    1985 H31 Stern Bilge

    I've known for several years that my 1985 H31 has a small bilge behind the main bilge. It is under the grate that lies just in front of the companionway steps and just behind the main bilge. It has been dry on previous inspections so I've not given it much thought. However I did find water...