Media

Navigation

Browse albums

Media comments

Media statistics

Albums
3,799
Uploaded media
22,708
Embedded media
19
Comments
425
Disk usage
2.2 GB
hatch board cut out...

hatch board cut out...

  • 0
  • 0
use holesaw to cut corners

use holesaw to cut corners

  • 0
  • 0
mast support at stern rail

mast support at stern rail

  • 0
  • 0
counter space at mini galley

counter space at mini galley

  • 0
  • 0
all storage lockers now have better support and stay in place. supporting the long locker made a huge difference in the feel of the seating here.... no sagging, sponginess, or movement of the cover board

all storage lockers now have better support and stay in place. supporting the long locker made a huge difference in the feel of the seating here.... no sagging, sponginess, or movement of the cover board

  • 0
  • 0
small shelf above table

small shelf above table

  • 0
  • 0
unfinished shelving

unfinished shelving

  • 0
  • 0
extended stern rail with cutout for ladder access

extended stern rail with cutout for ladder access

  • 0
  • 0
teak on the left, mahogany on the right

teak on the left, mahogany on the right

  • 0
  • 0
photo taken from sand island. Ansucian tied up at the sand island dock looking towards St. Helens Oregon..... columbia River

photo taken from sand island. Ansucian tied up at the sand island dock looking towards St. Helens Oregon..... columbia River

  • 0
  • 0
the original location of the galley

the original location of the galley

  • 0
  • 0
chain plate sealed.... one nicely applied application of the right stuff.

chain plate sealed.... one nicely applied application of the right stuff.

  • 0
  • 3
excess slack filled and faired with epoxy putty

excess slack filled and faired with epoxy putty

  • 0
  • 0
a nice clean surface to work with

a nice clean surface to work with

  • 0
  • 0
a small stainless steel wire brush like welders use is great for cleaning and removing old caulking.... never use a regular steel wire brush, stainless only.

a small stainless steel wire brush like welders use is great for cleaning and removing old caulking.... never use a regular steel wire brush, stainless only.

  • 0
  • 0
remove fairing plate and dig out old caulking to expose the depth of the damaged area

remove fairing plate and dig out old caulking to expose the depth of the damaged area

  • 0
  • 0
silicone is good stuff, but only if the surface is prepared for it. still, there is better stuff to use than silicone

silicone is good stuff, but only if the surface is prepared for it. still, there is better stuff to use than silicone

  • 0
  • 4
very ugly.... and even with three layers applied by differt people, it STILL leaked.... go figure! I found three layers that i could positivly identify, there were possibly more.... a shoe goo type stuff on top, silicone under it but on top of the fairing plate, and the original stuff under the plate.

very ugly.... and even with three layers applied by differt people, it STILL leaked.... go figure! I found three layers that i could positivly identify, there were possibly more.... a shoe goo type stuff on top, silicone under it but on top of the fairing plate, and the original stuff under the plate.

  • 0
  • 0
Sunburst at rest

Sunburst at rest

  • 0
  • 0
Never Forget 9/11/2001

Never Forget 9/11/2001

  • 0
  • 0
USNA '74 Gray Goats

USNA '74 Gray Goats

  • 0
  • 0
dave and sheri

dave and sheri

  • 0
  • 0
IMG 3262

IMG 3262

  • 0
  • 0
Rick and Nancy on boat

Rick and Nancy on boat

  • 0
  • 0
Top Bottom