Media

Navigation

Browse albums

Media comments

Media statistics

Albums
3,799
Uploaded media
22,708
Embedded media
19
Comments
425
Disk usage
2.2 GB
all cleaned and painted, reassembled.

all cleaned and painted, reassembled.

  • 0
  • 0
had to straiten the spring clamps.

had to straiten the spring clamps.

  • 0
  • 0
wire wheel on a drill works best.

wire wheel on a drill works best.

  • 0
  • 0
cleaning up the springs and hardware

cleaning up the springs and hardware

  • 0
  • 0
front portion painted

front portion painted

  • 0
  • 0
rear portion painted

rear portion painted

  • 0
  • 0
trailer painted

trailer painted

  • 0
  • 0
Cleaned and painted the galvanized trailer with Rust preventive aluminum paint.

Cleaned and painted the galvanized trailer with Rust preventive aluminum paint.

  • 0
  • 0
trailer couple needs replaced too.

trailer couple needs replaced too.

  • 0
  • 0
rusty winch has to go !

rusty winch has to go !

  • 0
  • 0
disassemble everything !!

disassemble everything !!

  • 0
  • 0
Starting on the trailer. Hubs, bearings, springs, tires, rims.

Starting on the trailer. Hubs, bearings, springs, tires, rims.

  • 0
  • 0
Hull and bottom completed.

Hull and bottom completed.

  • 0
  • 0
finished the wet sanding and buffed it out with a super cut marine buffing compound for gel coats. then applied a coat of New Finish, Once a year car polish. It was an awesome result compared to what it looked like before.

finished the wet sanding and buffed it out with a super cut marine buffing compound for gel coats. then applied a coat of New Finish, Once a year car polish. It was an awesome result compared to what it looked like before.

  • 0
  • 0
bottom and keel painted 3 coats.

bottom and keel painted 3 coats.

  • 0
  • 0
I spent many days wet sanding the gel coat w/ 600 grit wet sand paper and a sanding block. a couple of drops of dish soap in a spray bottle of warm water works a lubricant to ease the process somewhat.

I spent many days wet sanding the gel coat w/ 600 grit wet sand paper and a sanding block. a couple of drops of dish soap in a spray bottle of warm water works a lubricant to ease the process somewhat.

  • 0
  • 0
Cleaned the hull with soft scrub w/ bleach and a kitchen scrubby to remove all the oxidation. worked great !!

Cleaned the hull with soft scrub w/ bleach and a kitchen scrubby to remove all the oxidation. worked great !!

  • 0
  • 0
Grinding the keel to remove rust.

Grinding the keel to remove rust.

  • 0
  • 0
Almost ready.

Almost ready.

  • 0
  • 0
Looking good.

Looking good.

  • 0
  • 0
A lot of work here.

A lot of work here.

  • 0
  • 0
Starting on sanding the bottom.

Starting on sanding the bottom.

  • 0
  • 0
bottom is solid but is a mess. Well, here goes !!

bottom is solid but is a mess. Well, here goes !!

  • 0
  • 0
rusty ole winch.

rusty ole winch.

  • 0
  • 0
Top Bottom