Media

Navigation

Browse albums

Media comments

  • A
    1975 o'day 22
    will be changing to led lights both mast and cabin along with nav lights. adding solar, adding bbq, rebedding all deck hardware and below water...
  • Monsterfish
    Looking forward to V-berth.
    Wow.....dream home!
  • D
    MacGregor 26s
    Das sind Teakleisten, die aufgeklebt, dann mit Schwarzer Masse ausgegossen und geschliffen wurden. Sieht immer noch aus wie neu.....
  • P
    Marilee-Interior.jpg
    This interior is gorgeous! What type of boat is this in?
  • JohnScott
    DSCN8846
    CHILD LABOR

Media statistics

Albums
3,799
Uploaded media
22,708
Embedded media
19
Comments
425
Disk usage
2.2 GB
all cleaned and painted, reassembled.

all cleaned and painted, reassembled.

  • 0
  • 0
had to straiten the spring clamps.

had to straiten the spring clamps.

  • 0
  • 0
wire wheel on a drill works best.

wire wheel on a drill works best.

  • 0
  • 0
cleaning up the springs and hardware

cleaning up the springs and hardware

  • 0
  • 0
front portion painted

front portion painted

  • 0
  • 0
rear portion painted

rear portion painted

  • 0
  • 0
trailer painted

trailer painted

  • 0
  • 0
Cleaned and painted the galvanized trailer with Rust preventive aluminum paint.

Cleaned and painted the galvanized trailer with Rust preventive aluminum paint.

  • 0
  • 0
trailer couple needs replaced too.

trailer couple needs replaced too.

  • 0
  • 0
rusty winch has to go !

rusty winch has to go !

  • 0
  • 0
disassemble everything !!

disassemble everything !!

  • 0
  • 0
Starting on the trailer. Hubs, bearings, springs, tires, rims.

Starting on the trailer. Hubs, bearings, springs, tires, rims.

  • 0
  • 0
Hull and bottom completed.

Hull and bottom completed.

  • 0
  • 0
finished the wet sanding and buffed it out with a super cut marine buffing compound for gel coats. then applied a coat of New Finish, Once a year car polish. It was an awesome result compared to what it looked like before.

finished the wet sanding and buffed it out with a super cut marine buffing compound for gel coats. then applied a coat of New Finish, Once a year car polish. It was an awesome result compared to what it looked like before.

  • 0
  • 0
bottom and keel painted 3 coats.

bottom and keel painted 3 coats.

  • 0
  • 0
I spent many days wet sanding the gel coat w/ 600 grit wet sand paper and a sanding block. a couple of drops of dish soap in a spray bottle of warm water works a lubricant to ease the process somewhat.

I spent many days wet sanding the gel coat w/ 600 grit wet sand paper and a sanding block. a couple of drops of dish soap in a spray bottle of warm water works a lubricant to ease the process somewhat.

  • 0
  • 0
Cleaned the hull with soft scrub w/ bleach and a kitchen scrubby to remove all the oxidation. worked great !!

Cleaned the hull with soft scrub w/ bleach and a kitchen scrubby to remove all the oxidation. worked great !!

  • 0
  • 0
Grinding the keel to remove rust.

Grinding the keel to remove rust.

  • 0
  • 0
Almost ready.

Almost ready.

  • 0
  • 0
Looking good.

Looking good.

  • 0
  • 0
A lot of work here.

A lot of work here.

  • 0
  • 0
Starting on sanding the bottom.

Starting on sanding the bottom.

  • 0
  • 0
bottom is solid but is a mess. Well, here goes !!

bottom is solid but is a mess. Well, here goes !!

  • 0
  • 0
rusty ole winch.

rusty ole winch.

  • 0
  • 0
Top Bottom