Why do we flake the main sail? I've asked this before and have heard; to avoid wrinkles that weaken the sail fabric, to make storing of the main easy, to look nice, because it's been done for years, and some others I can't remember now. None of these make sense to me, however in previous threads (7+ years ago when I had a Hunter 23) I would make enemies when I stated and argued my thoughts. So this time I'll state but not argue. I'd like to keep you folks as friends. Nevertheless, I'd like to hear (again) opinions on this.
My thoughts:
_to avoid wrinkle that weaken the sail fabric_ Sail fabric is stiff enough that I can see bending it might weaken it some. However, flaking bends it in the same place every time. This should lead to weakness in the folds far sooner than the rest of the sail. Has anyone seen sails fall apart/blow out at the folds only? If not, why should we worry about bending/folding/wrinkling the sail?
_to make storing of the main easy_ As compared to flaking a new sail (mine is still new in this regard.) a sail trained to fold/flake in the same place every time is much easier. However, on my H 23 I just grabbed a large roll of sail from the foot and plopped the rest inside it and placed the sail ties. This was very easy. If making storage easy is the only reason, we'll all find different ways that are "easiest" for us and no one will be wrong.
_to look nice_ The H23 sail crumpled but covered with the smooth lower section of sail looked better (my opinion) that the floppy flaked sails I see. With a cover on they all look the same anyway.
_because it's been done for years_ Sailing is very traditional and that's one of the things I like about it... until it makes work for me. I like the nautical language, the salty look of some boats, traditions of the flags, the camaraderie of the dock, etc.. Work, of course, is relative and while I dislike flaking the sail (making it work) someone else might enjoy it (making it fun).
_some others I can't remember now_ But of course, I can't argue this point. If I could it wouldn't exist. <g>
Interested in your thoughts. I promise not to get ornery.
Geoff
My thoughts:
_to avoid wrinkle that weaken the sail fabric_ Sail fabric is stiff enough that I can see bending it might weaken it some. However, flaking bends it in the same place every time. This should lead to weakness in the folds far sooner than the rest of the sail. Has anyone seen sails fall apart/blow out at the folds only? If not, why should we worry about bending/folding/wrinkling the sail?
_to make storing of the main easy_ As compared to flaking a new sail (mine is still new in this regard.) a sail trained to fold/flake in the same place every time is much easier. However, on my H 23 I just grabbed a large roll of sail from the foot and plopped the rest inside it and placed the sail ties. This was very easy. If making storage easy is the only reason, we'll all find different ways that are "easiest" for us and no one will be wrong.
_to look nice_ The H23 sail crumpled but covered with the smooth lower section of sail looked better (my opinion) that the floppy flaked sails I see. With a cover on they all look the same anyway.
_because it's been done for years_ Sailing is very traditional and that's one of the things I like about it... until it makes work for me. I like the nautical language, the salty look of some boats, traditions of the flags, the camaraderie of the dock, etc.. Work, of course, is relative and while I dislike flaking the sail (making it work) someone else might enjoy it (making it fun).
_some others I can't remember now_ But of course, I can't argue this point. If I could it wouldn't exist. <g>
Interested in your thoughts. I promise not to get ornery.
Geoff