So I removed my mast step to attempt to release the table weight as it has rusted to the inside of the tube (great engineering there, steel weight on a boat). I have poured in enough anti-seize to empty 2 cans on both the top and bottom of the weight and let it soak for 2 weeks. I have hit it with a 5lb sledge (steel post into the mast step) and I have put a 3" ratchet strap on it for two weeks, cranked up as tight as I can get it. So far the darn thing has not moved. Looking for ideas on what might free this up. AND if I do push it further into the top where there is a ss plate welded on, do you think it will come back down and out? I will probably replace it with something stainless that won't rust in like this one has. Thanks for any help on this.