Good Morning All,
Long time no "see". or maybe "sea" ?
My main hatch is cracked on the bottom where the bottom fibreglass section meets the side.
The crack then progressed up the front port edge and 1 inch into the top section.
Water has damaged the core.
I'm thinking that I should cut the glass on the underside, along the edge, rebuild the core, fix the top crack, and bond the bottom back on.
My concern is keeping the hatch in the correct shape/curve. while I'm doing this.
Any suggestions on how to build a jig so the hatch retains it's correct shape while I'm repairing it ?
Cheers,
Roy
Long time no "see". or maybe "sea" ?
My main hatch is cracked on the bottom where the bottom fibreglass section meets the side.
The crack then progressed up the front port edge and 1 inch into the top section.
Water has damaged the core.
I'm thinking that I should cut the glass on the underside, along the edge, rebuild the core, fix the top crack, and bond the bottom back on.
My concern is keeping the hatch in the correct shape/curve. while I'm doing this.
Any suggestions on how to build a jig so the hatch retains it's correct shape while I'm repairing it ?
Cheers,
Roy