Pull out bunk

Status
Not open for further replies.
D

Dave

Over the years I know that I have seen plans for the modification of the main cabin bunk on at CAT 27 from a single to a double by adding a plywood sheet configuration. Now that I need to do it I can't find anything in the archives. Can I get some feed back on how anyone rigged a plywood insert that makes a good double? Thanks
 
May 25, 2004
173
Oday 25 Tampa Bay
1984

Dave, I may be wrong but I think after 1984 the double {pull out} bunk became standard. With thousands of Cat 27's around maybe you could find one at the local marina and ask the owner for a look on how Catalina did it. If you don't get more help from this site, I will take some pictures and post them for you. Good luck, Jack
 
P

Peter

Just go to www.catalina27.org and on the left side go to FTP and then interior. There's a couple of pictures of a pullout bunk setup. Peter
 
D

Dave

Message to Jack

Jack: I took Peter's advice and looked over the 27 site. My boat is a 1976 so it is a far cry from the 1984 series. If you could put your photos on the site that would be great...always like to get a many ideas as possible before "the leap of faith".....As for checking out the fleet...I live in Alaska and the active CAT 27 fleet is me...Thanks...DAVE
 
Status
Not open for further replies.