The mirrored slider panels in the vanity and head on my 34 were pretty rough. Doesn't look too nasty in the image, but you can see how the reflective film was flaking off the edges. A big chunk of the reflective film was missing out of one panel above the view shown below.
The head was worse. (sorry no pic)
I simply pulled out the panels, measured and ordered pre-cut replacements from Tap Plastics here.
They are:
Mirrored Acrylic Sheets (Cut-to-Size) - Clear
Approx $19 per panel not including shipping. Same price for the ones in the head.
I just penciled the hole locations from the originals on to the new panels and drilled them out then replaced all handles with inexpensive ones from Home Depot.
The old ones didn't bother me all that much, but my wife was really happy. If she's happy when I spend any money on the boat, that's a good thing.
The head was worse. (sorry no pic)
I simply pulled out the panels, measured and ordered pre-cut replacements from Tap Plastics here.
They are:
Mirrored Acrylic Sheets (Cut-to-Size) - Clear
Approx $19 per panel not including shipping. Same price for the ones in the head.
I just penciled the hole locations from the originals on to the new panels and drilled them out then replaced all handles with inexpensive ones from Home Depot.
The old ones didn't bother me all that much, but my wife was really happy. If she's happy when I spend any money on the boat, that's a good thing.