Binnacle Guard

shanker

shanker

.
Oct 10, 2010
269
Hunter H260 Gull Lake
Looking for a binnacke guard for my hunter 260. Ideally with feet. I don't need and attachment point to the binnacle as I will make one to fit. 1" tubing is the standard tubing diameter.
 
jssailem

jssailem

.
Oct 22, 2014
21,088
CAL 35 Cruiser #21 moored EVERETT WA
I found my guard at a consignment shop. You might find one there. Or you might get a pipe bender and make your own.
 
sail sfbay

sail sfbay

.
Feb 21, 2013
4,638
Hunter 46 Point Richmond, CA
shanker said:
Looking for a binnacke guard for my hunter 260. Ideally with feet. I don't need and attachment point to the binnacle as I will make one to fit. 1" tubing is the standard tubing diameter.
Click to expand
Check these threads out:

Pedestal guard installation

Hello; I would like to install a pedestal guard on my H260 as opportunity to mount instrument housings, etc. By searching for guards I have found the following most common measures. center to center width: 9.5" tubing: 1" or 1.25" high: 54" to 62" Stylewise there are three different...
forums.sailboatowners.com

pedestal guard installation

Need some advice on the best way to instal a pedestal guard. Mainly the feet. I am somewhat hesitant to drill holes through the cockpit floor. Are there any other ways to secure it with out having to drill? Thanks!
forums.sailboatowners.com
 
You must log in or register to reply here.

Top Bottom