mast and standing rigging

Rigging replacement, Hunter 49 B&R Fractional, no backstay: Some, perhaps most of you are driven to this by insurance company requirements, Im not, its more a case of due diligence and having it not come down. So if yours is great than 10 years old, how old is it ? I am looking to replace...

We just bought a 2001 Macgregor 26X swing keel. It was changed over to an M sail and rigging. Someing happened to the mast so we need to figure best way for future use. Have the M rigging but could revert back to the X if we want. Any opinions? Trying to figure out the best solution since we are...

I recently replaced turnbuckle ends on the side wires but not the forestay. Anyone who has raised the mast without being careful has probably bent a few of those turnbuckle ends accidentally. Whoops... Now, even with the forestay as short as possible, my mast foot does not set flush with the...

I bought a 1995 43 Legend, and I´m struggling with the decision of what to replace, and how far to go? Absolutely, I´m on a budget, so it has to be money wise. If there is someone who can help me, I have plenty of photos.

Good day all I'm hoping someone can answer this question for me.. I'm tasked with sleeving a 303 mast for a friend and need to know the complete length from mast step (keel stepped) to mast head? It broke at deck level and the base has substantial corrosion. The break is now sleeved but still...

I purchased a 1982 O'Day 19 yesterday and one of the pins that hold the mast in place was replaced with a nut and bolt by the previous owner. Where can I go about getting replacements? I'm new to all of this. I tried google and found some parts sites, but couldn't find that particular thing...

I am the proud new (FIRST TIME) owner of an '82 Macgregor 25. I have it in the water at Lake Lanier (Atlanta). I have the mast up but haven't put the boom on yet. I'm worried about tuning the stays and shrouds. Do I need a tension gauge? I want to mount a Davis Windex 10 and I have a 36"...

I am pulling my aluminum mast to fix a deck leak. And while it is down, I'd like to do some maintenance & upgrades I'd appreciate any advice on what maintenance and upgrades to do while the mast is down...? Thanks again, Rob

I posted a re-creation of the Oday logo with trident over 5 years ago. An update is attached. Here are the rigging measurements -https://www.fossilbeach.com/ODAY22Dims.txt Oday 22 Measurements (1989) Kenyon Mast: 27 feet 1 1/2 inch https://www.fossilbeach.com/Oday22_Kenyon_spar.JPG Dims: 2...