Media
Navigation
Media comments
-
Finished!Those replacement bulkheads look great and appear to match well to the other woodwork I can see in the photos. I'll try to figure out how to... -
SERENITYYou can use both panels at the same time. Because they are completely seperate sytems. The only reason you have a master over ride switch on you... -
SERENITYI am replacing the original panel all together. The original panel is not waterproof and is down by the floor. I'm also adding circuits. The...
-
SERENITYYes, you can have the DC panel & the AC panel active at the same time. They are electricity seperate systems.
-
SERENITYAnd you don't have an override like on a house generator breaker, you just make sure all switches except your master/battery switch are off while...
Media statistics
- Albums
- 3,799
- Uploaded media
- 22,708
- Embedded media
- 19
- Comments
- 425
- Disk usage
- 2.2 GB
trailer2; I put a long 4x4 timber on the mast crutch. It is held off the cabin forward with a 2x4 at right angles and little 1x2 feet under that. I tack the 3/8 plywood (cut outs for winches and back stays) to the 4x4 every fall with roofing nails. Then cover with a small tarp.
- Chris14830
- Nov 12, 2010
- 0
- 0
