Wednesday is Photo Day 2024

Phil

.
Feb 11, 2017
301
Morris Annie Haleiwa, HI
:wow3:This picture is from 9 years ago but I still like it. There's a sailboat in the picture.

View attachment 228110
Yeah....my wife and I always joke about the "sailing" tourist catamarans on Maui. The vast majority of them motor everywhere they go. It appears that Sail Maui is the only company that sails a significant amount while out and about. Bottom line....there's a "sail" boat in my picture :)
 
  • Like
Likes: Will Gilmore

WayneH

.
Jan 22, 2008
1,081
Tartan 37 287 Pensacola, FL
When I pull the stop on our diesel, the Admiral says "Thank you." Right before that is usually this conversation. "How are we doing?" "In neutral and making 3.5 knots." "Roll out more jib and let's sail."

Powerboats run their engines at full throttle to get "There." Sailors kill their engine and are "There."
 
Jan 7, 2011
5,248
Oday 322 East Chicago, IN
Sorry…no boat down here in Florida:(

But the Z3M I dragged down here seems happy at the beach;)
IMG_3283.jpeg IMG_3431.jpeg FullSizeRender.jpeg

Went to Margharitaville on Fort Meyers Beach the other night for drinks and caught a beautiful sunset…
IMG_3592.jpeg
…there was a catamaran out there somewhere.

Heading north tomorrow for the holidays…Thanksgiving at home in Indiana and Christmas in Colorado before heading back to Florida at the first of January.


Greg
 

Phil

.
Feb 11, 2017
301
Morris Annie Haleiwa, HI
I'm in the process of repainting the non-skid on the deck and cabin top of Kolibri. One of the previous owners continued the non-skid to the toe rails, hatches, all deck hardware, etc so the process is slightly more involved. I've added channels along the toe rails and many other necessary areas to improve water flow to the scuppers in sloppy conditions. I also decided that this was the perfect opportunity to strip the varnish off the toe rails and apply new varnish.

After stripping.

IMG_0662 cr.jpg


After 5 coats of AwlSpar M3131. ~2 more coats to go then a few coats of AwlBrite will be applied once the non-skid is done.

IMG_0668 cr.jpg
 
  • Like
Likes: Will Gilmore