All Activity
-
Jjoelm100 reacted to dLj's post in the thread Help-I've got hockles in my sheets and need to get them out! with
Like.
How new is the line? I've found new line often comes with a fair amount of twist in it. I will take new lines and lay them out straight... -
Rick Webb replied to the thread Cracked Weld in Arch (310).Removing the arch is not simply unscrewing the fasteners and pulling the arch off. At least half of those fasteners are not going to... -
Iice breaker replied to the thread Cockpit speakers 2004 Hunter 41 - recommendation ?.I replaced mine with JBL infinity waterproof versions. They are still working great 10 years later. My first replacement at 5 years...
-
Ralph Johnstone replied to the thread Bilge Pump will not stop.Any chance you've got a copy of the original wiring diagrams for your 1992 Hunter ? If not, there may be a copy on line in the archives... -
Jjoelm100 replied to the thread Help-I've got hockles in my sheets and need to get them out!.Excellent! and thanks all. The block at the traveler does swivel. I'll take a look at it next time I'm down there and see if I can...
-
Jjoelm100 reacted to colemj's post in the thread Help-I've got hockles in my sheets and need to get them out! with Like.
If the block on the traveller can swivel, then fix it or replace it with a fixed block. A swiveling block there would be the #1 cause...
-
@rjadelsohn I don't believe there are many big sport fishers on our end of the bay or even on the BB but there sure are in Cape May... -
Ccolemj replied to the thread Help-I've got hockles in my sheets and need to get them out!.If the block on the traveller can swivel, then fix it or replace it with a fixed block. A swiveling block there would be the #1 cause...
-
Ccolemj replied to the thread Cracked Weld in Arch (310).If Hunter sterns are deforming just by removing that arch or moving the boat without it, then I will need to adjust my opinion of them...
-
tonyh1307 replied to the thread Where do you find the sheaves for the roller bar under the mower deck.Thanks, I will give it a look -
tonyh1307 reacted to jssailem's post in the thread Where do you find the sheaves for the roller bar under the mower deck with Like.
Ideas. First you need the Pin diameter → bushing ID (usually a loose sliding fit; common sizes are in the ⅜–⅝″ / 10–16 mm range). Then...
-
jssailem replied to the thread Where do you find the sheaves for the roller bar under the mower deck.Ideas. First you need the Pin diameter → bushing ID (usually a loose sliding fit; common sizes are in the ⅜–⅝″ / 10–16 mm range). Then... -
Ralph Johnstone replied to the thread Bilge Pump will not stop.Now it gets weird which makes it interesting. When you are at the boat, could you please switch the breaker switch for the water pump...
-
tonyh1307 posted the thread Where do you find the sheaves for the roller bar under the mower deck in Parts Search.Where do you find the sheaves for the roller bar under the mower deck. This is a 2004 Hunter 386. I was replacing the continuous...
-
-
jssailem reacted to Woodworks1's post in the thread O'Day 30 Stuffing Box Hose Replacement with Like.
Great resource on re-packing-a-traditional-stuffing-box. I did my stuffing box this spring. I must have read at least 25 post and some...
