All Activity
-
Ralph, Did the same a few years ago, refusing to pay outrageous price for sailkote. BUT, I did a side by side comparison test on a... -
Scott NIelsen replied to the thread Exterior wood hand rails.I removed the wood handrails and replaced them with colored starboard (HDPE) ones with an aluminum strengthening channel routed in them... -
Tally Ho replied to the thread Compass - Hunter 320.My old compass leaked out the fluid, and I took it home to try and refill it. Trial and error, but I finally found a decent way to... -
DTether or not, auto or manual, important questions for off shore sailing. Here's a real life experiment from John Kretschmer.
-
sailme88 reacted to rgranger's post in the thread Why you DON'T want to transit Dent Rapids (Yacultas) at the wrong time! with
Ha.
I think I dated her in high school…:yikes: -
BigEasy replied to the thread Adventures with a Beneteau faucet.Let it go Stu; not worth the worry! -
Since you mentioned windlass leak, test the leak as mentioned above, by having someone spray water from above onto the windlass. If you... -
Last big trip with a few hours to go I noticed my engine control panel no longer had power. This happened about 10 years ago and at that... -
-
rpwillia replied to the thread S1 Wheel Pilot conversion.Just a quick follow up. It looks like I can do it with minimal effort (unless you count the fiberglass structure to mount the drive...
-
-
JoeWhite replied to the thread windlass leak.Since you mentioned windlass leak, test the leak as mentioned above, by having someone spray water from above onto the windlass. If you... -
Tally Ho replied to the thread 1988 Catalina 34 Shaft length?.When I needed to replace my shaft, I pulled it out of the boat and took it to the shop, where they made new one. Greg
-
Looks good Greg. Appears you don’t have much of a tripping hazard. That is one reason I still have the line running along the rail.
-
kloudie1 reacted to Rick Webb's post in the thread Mercury 9.9 (2 stroke) hard to shift / accelerate with Like.
Sounds like the shift linkage is out of whack There is a barrel nut towards the bottom of the leg where the shift rod enters the lower... -
Bill these images are front he 310. The 315 appears to have a similar rigging set up in online images. You might want to ask the... -
Stu Jackson replied to the thread Do I want to purchase a 275?.Rob, on boats like this one, the answer to your jib / genoa size question will largely be determined by the rigging and deck hardware...
![20260726_122213[1].jpg](/data/attachments/217/217117-9bd4e0acfcce9a528a403c52e0b6152e.jpg)
![LD1-02-big[1].jpg](/data/attachments/217/217115-b1bc2c5b95540dfc2b03d023e8679b15.jpg)