All Activity
-
Stu Jackson replied to the thread Adventures with a Beneteau faucet.Too true. The darned 95F heat was a killer, for sure, but then I realized why DOUBLE CLAMPS should be de rigeur for this kind of work... -
jssailem replied to the thread windlass leak.Leaks are a pain. I understand. Very few times are two different boats made be the same company going to identical leaks. They may be in... -
jssailem replied to the thread Rigging a Catalina 315 traveller.Bill these images are front he 310. The 315 appears to have a similar rigging set up in online images. You might want to ask the...
-
-
jssailem replied to the thread Furling line control.Looks good Greg. Appears you don’t have much of a tripping hazard. That is one reason I still have the line running along the rail.
-
jssailem replied to the thread Why you DON'T want to transit Dent Rapids (Yacultas) at the wrong time!.Not if you transit the waters during the slack. There are jet boats that bring the tourists out to see the whirlpools up close and...
-
jssailem replied to the thread New Owner - Purchasing a 310, survey says moisture and delamination in rudder.Compared to what? How do you define “slow to respond”? You turn the wheel with no power on and it does not turn? You apply power...
-
jssailem reacted to Diablito's post in the thread Request for instructions to wire 1997 Hunter 376 VDO Quartz hour meter to Yanmar 2JH3E with
Like.
Thanks Greg. The alternator picture was provided because Hunter wired either to the hot starter connection or to the same connection as... -
jssailem replied to the thread Disassemble ST4000 MK2 wheel unit.The Raymarine wheel is expensive. If I had to replace it I would look at installing a linear drive unit. I fortunately I found, via an...
-
Solved…… hole in the intake hose where it went through a wall. I hit it with a saw this spring when I was moving my shower pump... -
Rick Webb replied to the thread Mercury 9.9 (2 stroke) hard to shift / accelerate.Sounds like the shift linkage is out of whack There is a barrel nut towards the bottom of the leg where the shift rod enters the lower... -
Solved…… hole in the intake hose where it went through a wall. I hit it with a saw this spring when I was moving my shower pump... -
shemandr replied to the thread Rigging a Catalina 315 traveller.I never used to read the instructions for exams either. Burned me a few times. -
Ddlochner replied to the thread Hunter boarding ladder platform.....How about something like this: https://www.marinedepotdirect.com/boat-boarding-ladder-treads-snap-on.html Or these...
-
Ddlochner replied to the thread Rigging a Catalina 315 traveller.Can you provide a photo of the unrigged traveller?
-
Tally Ho replied to the thread Hunter boarding ladder platform.....I added some steps to my swim ladder rungs (that were just the metal rungs and hard to climb in bare feet). Super cheap, and they have...
