All Activity
-
jssailem reacted to rgranger's post in the thread What is De-Waxer actually for? And what is it NOT for? with
Helpful.
... that you will be wanting one of these if you use it... Available at Lowes and Home Depot. -
My boat was setup like this when I got it. It's made engine work a dream. Great upgrade.
-
yes, I thought of the Jack, it is already in place. The thing I didn’t think about was the through bolt holding it to the steering...
-
jssailem reacted to Timm R Oday25's post in the thread Replacing a mast…and going taller? with
Like.
So now to yet another viewpoint . While welding is definitely a viable option . Depending on the cost of the mast and transportation... -
I have sent a few emails to Direct-Sails, and so far Richard said he was going to talk to the designer. It has been near 3 weeks and no...
-
shemandr reacted to Ralph Johnstone's post in the thread Hunter 29.5 tinted window replacements with Like.
If you can't get one off the shelf, you'll have to have one fabricated for you. The measurements you require for a good fit wouldn't... -
jssailem replied to the thread Swap Airmar Depth Transducer and STW Transducer.Those are not that far apart. Yes, there is some difference when the transmission is at an angle rather than vertically down, which can...
-
-
JoeWhite reacted to dlochner's post in the thread Swap Airmar Depth Transducer and STW Transducer with Like.
If the transducers are the same diameter it should be an easy swap. Transducer locations, either depth or speed, are always a... -
Ddlochner replied to the thread Swap Airmar Depth Transducer and STW Transducer.If the transducers are the same diameter it should be an easy swap. Transducer locations, either depth or speed, are always a...
-
Joe replied to the thread Hey 49 owners.Do you have an owner's manual? A 49 ft boat could justify have 3 separate interior 12 volt circuits, that would give you options for... -
Terry Cox replied to the thread Hunter 45CC wing keel dimensions please.Good morning. Different model, but our bulb wing keel very close in size. Not precise, but 45" is about right, although a bit on the... -
I was faced with running my cables from the mast to the electrical panel. The original wires were somewhere in the compression post... -
What indicates it had overheated ........... the engine siezed, burning smell, high temp alarm ? What RPM when you shut it down ... -
Not necessarily. Keep thinking good thoughts. It is not good that the engine overheated. What you need to do is to assess what has...
-
fred1diver replied to the thread 1972 Pearson P30 rudder bushing.yes, I thought of the Jack, it is already in place. The thing I didn’t think about was the through bolt holding it to the steering...
