All Activity
-
jssailem replied to the thread 1972 Pearson P30 rudder bushing.I would put some type of jack-supported structure and lower the rudder rather than attempting to catch it, "not knowing the weight"... -
Hey fellow sailors. Some were curious how the 'hair product' would turn out. I left it on for many hours in the sunlight. Not perfect...
-
That is not a popular opinion here. Although true and well-documented, there are some here that will go bananas on you for pointing it...
-
jssailem replied to the thread Easylock Rope Clutch handle replace.It is a designer's nightmare. Trying to outthink the boat builders and boat owners. :facepalm:
-
I’ll try to remember to report back :) To be clear, when mentioning the design, I was thinking about the designers of the clutch block...
-
jssailem replied to the thread Connection of Main Sheet to Sole attachment point.Way to go. You are ready to go sailing.:biggrin:
-
jssailem reacted to Dave0963's post in the thread Connection of Main Sheet to Sole attachment point with
Like.
Thank you, everyone! Your thoughts and ideas are confidence builders. I was at my boat yesterday and after reading your thoughts my... -
:plus:
-
What indicates it had overheated ........... the engine siezed, burning smell, high temp alarm ? What RPM when you shut it down ...
-
Not clear what it means. If it's the raw water pump, then here's the fix. Oberdorfer Pump Rebuild 101 -...
-
SailormanDan replied to the thread Yanmar 1GM10 engine tuning.If it starts and runs, bleed the lines like Benny suggested, then look at other things like fresh fuel. The Yanmar 1GM in my 1981 H27... -
Justin_NSA replied to the thread Plastic housing whitener suggestions.Hey fellow sailors. Some were curious how the 'hair product' would turn out. I left it on for many hours in the sunlight. Not perfect... -
-
kappykaplan replied to the thread Overheated universal m25.:plus: -
Ralph Johnstone replied to the thread Overheated universal m25.What indicates it had overheated ........... the engine siezed, burning smell, high temp alarm ? What RPM when you shut it down ... -
-
Stu Jackson replied to the thread Overheated universal m25.Not clear what it means. If it's the raw water pump, then here's the fix. Oberdorfer Pump Rebuild 101 -...
