I have recently purchased a new to me boat with a Yanmar YGM20F engine that has a heat exchanger. Included with all of the spare parts was a few Zink engine anodes. For the life of me I cannot locate where they go on the engine. There is a heat exchanger on the engine and that also heats the water in the hot water tank. I sail in a salt water location and want to ensure that I am adequately protected.
Comments or suggestions are welcome. The engine is a 1986 model in a Pearson 28-2 if that has any bearing.
Thanks
Comments or suggestions are welcome. The engine is a 1986 model in a Pearson 28-2 if that has any bearing.
Thanks