Hey everyone, quick question, I found a deal on some ¼ inch plexiglass, what spacing should I use for the screws?
I'm not sure which ports you are referring to. Are some in a frame? The method Andy uses in the BoatWorks Today video is pretty bomb proof. No screws needed if you follow the directions and use the 3M very high bonding tape and a good caulk.ok, so "gluing" them is pretty straight forward, at least on drop in windows, but how about side mounted ports? will the tape hold them enough for the tape to achieve full bond?
One method used before the 3M tape was available used a few small screws that were out side the plexiglass. The PG sat on the screws, no holes were drilled.no frame on mine, was just wondering if the tape's initial bond will suffice to hold them securely before full adhesion.
I'm going to use that method, thanks everyone
Nice idea!Stuck wooden blocks as guides to the paper on the plexiglass with double sided tape to ensure a smooth one time install