Just like New and Improved !Nice bit of history. Something that always "peeves me" is when someone say ends a radio transmission with "over and out" It is either one or the other.
Greg, this is an honest (not contrarianBut I get yelled at by the Coast Guard if I request a radio check
I like to know my radio works should I need to hail a big ship in the neighborhood.Greg, this is an honest (not contrarian) question: why do you feel you need to do a radio check?
Here in BC there is a separate channel for skippers to use for radio check (I forget which one, probably 83A for the CG, definitely NOT 16 or 9). It is unfortunate that so many skippers seem to be unaware of this, since all you have to do is turn your radio on and listen to 16 and keep hearing "Vessel calling for radio check on 16, please switch and use 83A for radio check." Think they'd learn? As in reading their VHF manual that has the channels listed, or every year Pacific Yachting magazine does a VHF story bout procedures and/or VHF technology / new radios that includes the channels and what to use them for.
"When will they ever learn?"
I'm pretty sure you're referring to the Towboat US automated radio check system, which was discontinued in 2020 or thereabouts.BoatUS used to have an automated radio check in my area. I am not sure if they turned it off or if I am too far away to get a bounce back from them.
Maybe that was it…good know it was discontinued…and it is not just my radio!I'm pretty sure you're referring to the Towboat US automated radio check system, which was discontinued in 2020 or thereabouts.
But if your radio is DSC equipped you can use the CG’s automated DSC radio check capability - DSC Testing | Navigation Center. I do that once in a while. The only downside is that you know your signal was received, but you don’t know where the receiving tower is or what the signal quality is.I'm pretty sure you're referring to the Towboat US automated radio check system, which was discontinued in 2020 or thereabouts.
I was not aware of that function. My radio is DSC equipped. Will give that a try when I get to the boat later this week.But if your radio is DSC equipped you can use the CG’s automated DSC radio check capability - DSC Testing | Navigation Center. I do that once in a while. The only downside is that you know your signal was received, but you don’t know where the receiving tower is or what the signal quality is.
It only works for DSC radios made after 2011.I was not aware of that function. My radio is DSC equipped. Will give that a try when I get to the boat later this week.
Thanks for sharing,
Greg
"Where have all the flowers gone?""When will they ever learn?"
Dav, that was my experience when I moved here, too, although on SF Bay folks were pretty good, too. Just the fishermen abused it there. In addition, etiquette seems to be observed when transmitting. Lots less O&O carp.I've spent the last 6 weeks in Eastern Canada and one of the remarkable, of many remarkable, things I"ve not hear is a lot of chatter on Ch 16.
Aren't "Out" and "Standing by" for two different situations? "Standing by" is for when you are doing that; monitoring whatever channels you're continuing to monitor. "Out" would be to indicate that you are turning off the radio. How you sign off from an exchange over the radio depends upon what the situation is. When we call the launch we use "out", because we turn the radio off after they acknowledge our call, and close the hatches. When we have a discussion with a Race Committee we use "standing by..." and leave the radio on so we can hear what else might be transmitted.I too am in NE waters and agree, USCG uses "out" when completing a VHF conversation or broadcast. They also use "over" just as a previous poster said, when the person is done speaking and he is now listening. FYI, when I'm in a conference call w/ USCG personnel (civilian and military) they also say "over" when done speaking.
FWIW, I use the traditional professional mariner sign off in stead of "out." That is, I state the name of my vessel and that I am standing by on whatever channel(s) I'm monitoring. Most times it is 13 and 16.
My understanding is that "out" means you have finished that conversation and will not necessarily be listening on the same channel - to be contacted again would require hailing. "Out" also means the channel you are talking on is available to anyone else to use. "Standing by" means you are remaining on that same channel listening for all further communications and would not require being hailed. Pretty much as you stated.Aren't "Out" and "Standing by" for two different situations? "Standing by" is for when you are doing that; monitoring whatever channels you're continuing to monitor. "Out" would be to indicate that you are turning off the radio. How you sign off from an exchange over the radio depends upon what the situation is. When we call the launch we use "out", because we turn the radio off after they acknowledge our call, and close the hatches. When we have a discussion with a Race Committee we use "standing by..." and leave the radio on so we can hear what else might be transmitted.