Not a bad day. Rudder and tiller sanded and 4th coat of varnish. Gave the companionway hatches a quick sand and 2 coats if varnish. I can also finally say that the bottom is officially over halfway sanded!
Just cheap minwax helmsman spar varnish I had sitting around from another project. The PO had stripped the rudder and tiller to bare wood. I sanded them further with 80-180-220 on a block to flatten things out from him power sanding it. I've been giving it 8 hours to dry,block sanding it with 220, recoat, repeat. I think I will leave it to dry thoroughly for a few days before I sand and recoat again.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.