Not sure what you were trying to do. I generally use the fresh water pump to empty the water tank into the sink, and out of the boat.I drained the fresh water tank into the hull. Is there a drain to let water from this area into the bilge? I couldn't find one.
How goes the progress on replumbing the boat? What are you using for pipe/hose and fittings?I siphoned the water into the bilge to remove it. I was replumbing the boat.
Thanks for the replies.
The pressure side is finished. I have one drain and the holding tank vent left to replace.How goes the progress on replumbing the boat? What are you using for pipe/hose and fittings?
Got some pics to go with? I would love to see how it turns out. If you have seen any of my pics of Luna in this forum, you will see I need to do much of the same for her.I
The pressure side is finished. I have one drain and the holding tank vent left to replace.
The pressure side is all PEX. Drains and vents are nylon reinforced vinyl tubing.
No pictures. It's mostly in the bilge area.Got some pics to go with? I would love to see how it turns out. If you have seen any of my pics of Luna in this forum, you will see I need to do much of the same for her.