From my 1986 H34. Is there a common name for this 90 degree fitting? Are they still available. The only marking on the fitting is NSF-PW which is not identifying information. This was on the water line just prior to the fresh water tank. I'll assume it is an original connection.
Water Line Fitting
- Thread starter Tom-in-Annapolis
- Start date
QEST Fittings Elbows
Save money at Coms! Cut to length hose, pumps, fittings and everything you need to stay on the water. QEST Fittings Elbows
comsmarine.com
Hi Tom, I suspect your water system was built very much like the system on our 1991 boat. A Bing search will bring up an assortment of suppliers where you can find what you need. I wrote an article awhile ago that describes ours here: Hunter 42 Owner Modifications and Upgrades
E-bay might have what you need. Zurn Qest Pex QE32T QickTite Pipe Fitting 1/2" x 3/8" MPT 90° Male Elbow Adapter | eBay
E-bay might have what you need. Zurn Qest Pex QE32T QickTite Pipe Fitting 1/2" x 3/8" MPT 90° Male Elbow Adapter | eBay
Get that most local hardware stores or big box stores like Lowes and Menards, I would switch to brass so it don’t break again.
Nope! Zurn Qest Pex fittings like shown by the OP have been out of production for several years. I have found no big box/hardware stores carrying the product and haven't for years. There are a few after-market sites and individuals that carry the product, but some try to gouge, so search around for the right source.
