Houdini could do it.
Hi,Had the same problem with mine. You can use a mirror and flashlight to see the bolt that you will need to tighten. there is not much room and you will need several extensions for your socket wrench, I think I used 4 large ones. It was not fun. I found it was easier to work from inside the locker (im not a small guy and I fit)If this doesnt work use a hole saw to drill the holes through the cockpit side of the transom under the ends of the traveler bar. You dont want all the extra motion on the traveler.Hope it helpsTahoeTimCat 22 Mauna Makani