Switch Panel Recommendations?

Jan 14, 2014
225
Newport Newport 28 Fair Haven, NY
Just to toss out an inexpensive option, I grabbed one of these for mine:
https://www.amazon.com/gp/product/B071JHMFLF

Individual fused switches with different amperage ratings, set in two "banks" of 4 - each has a power lead that feeds the 4 switches. There's a 5-5-10-15 amp configuration for each set of 4. Illuminated lighted switches when on, and easy enough to do. Might not be the most elaborate out there, but was cheap enough, and has held up just fine.
 

Bob J.

.
Apr 14, 2009
773
Sabre 28 NH
I happened to be digging thru electrical stuff on the boat this afternoon. The toggle switches I used for the nav lights are SPDT, not DPDT. Sorry for the confusion.
 

Sumner

.
Jan 31, 2009
5,254
Macgregor & Endeavour 26S and 37 Utah's Canyon Country
I happened to be digging thru electrical stuff on the boat this afternoon. The toggle switches I used for the nav lights are SPDT, not DPDT. Sorry for the confusion.
I only used DPDT so that ....

... I could run the LED indicator lights off of one side. SPDT (center off) would also work. Would just have to double up the wires to the load and LED on one side of the switch,

Sumner
==========================================================================
1300 miles to The Bahamas and Back in the Mac...
Endeavour 37 Mods...

MacGregor 26-S Mods...http://purplesagetradingpost.com/sumner/endeavour-main/endeavour-index.html
Mac Trips to Utah, Idaho, Wyoming, Canada, Florida, Bahamas