dont own a hunter now but am looking at a 89 30',there are some soft spots on the forward deck should i run away from this or could it be an easy fix hate to spend $ on survey and not get boat
soft deck
- Thread starter blackford21
- Start date
- Status
Likely can fix it
Depending on how large the soft spots are, fixing a soft deck in fairly easy using the drill and fill method. Drill holes about 1/2 inches apart and fill with Git-rot or other similar epoxy mix. It will take a little time and look good. If the remainder of the boat is o.k. the soft spots should not stop you from going forward.
Depending on how large the soft spots are, fixing a soft deck in fairly easy using the drill and fill method. Drill holes about 1/2 inches apart and fill with Git-rot or other similar epoxy mix. It will take a little time and look good. If the remainder of the boat is o.k. the soft spots should not stop you from going forward.
- Status