I have a 1987 Legend 35 with a SeaLander model 752 manual toilet that requires a rebuild, can someone direct me to a location that would carry these rebuild kits? TX John Vasey vaseyj@ihorizons.net
- Status
No parts available any longer for SeaLand 751/752
SeaLand stopped making the 752 (which was the successor to the even older 751) more than 10 years ago. They stopped supporting it with parts 3 or 4 years ago. One of their distributors bought the last remaining parts inventory, but that didn't include any rebuild kits. However, even if a rebuild kit were still available, I don't recommend putting any $$ into a toilet that old.. Everything has a lifespan, and your toilet has been living on borrowed time for several years...it's time to replace it. If you search the HOW archives, you'll find quite a bit of previous discussion about it. Btw...I'm surprised that a 37' boat was equipped with a 752...it's a compact toilet mostly found on boats under 30'. Hunter equips most of the larger boats with Jabsco toilets.
SeaLand stopped making the 752 (which was the successor to the even older 751) more than 10 years ago. They stopped supporting it with parts 3 or 4 years ago. One of their distributors bought the last remaining parts inventory, but that didn't include any rebuild kits. However, even if a rebuild kit were still available, I don't recommend putting any $$ into a toilet that old.. Everything has a lifespan, and your toilet has been living on borrowed time for several years...it's time to replace it. If you search the HOW archives, you'll find quite a bit of previous discussion about it. Btw...I'm surprised that a 37' boat was equipped with a 752...it's a compact toilet mostly found on boats under 30'. Hunter equips most of the larger boats with Jabsco toilets.
You should know Hunter better
Peggie, Hunter has a tendency to use what ever part they have on hand on any of their boats. My '84 34 came with a 15x12 prop. Other 34's in my marina with the same draft, engine, gear ratio, and year had 15x15's. 15x15 is the better prop for the 34 with Yanmars. I guess this is a cost saving measure "to keep the cost to the boat buyer down". Oh well, least of the problems...
Peggie, Hunter has a tendency to use what ever part they have on hand on any of their boats. My '84 34 came with a 15x12 prop. Other 34's in my marina with the same draft, engine, gear ratio, and year had 15x15's. 15x15 is the better prop for the 34 with Yanmars. I guess this is a cost saving measure "to keep the cost to the boat buyer down". Oh well, least of the problems...
Raritan Head
I went thru the same thing... looking for parts. Didn't find any. Replaced the Sealander 752 with a Raritan PH II based on Peggy's advice. Installation was easy and it works fine. Available from BOATUS/West Marine.
I went thru the same thing... looking for parts. Didn't find any. Replaced the Sealander 752 with a Raritan PH II based on Peggy's advice. Installation was easy and it works fine. Available from BOATUS/West Marine.
- Status