Replacing Halogen bulb in fixture

[WhiteNow]

Anyone know how to access these fixtures to swap bulb and or replace with LED's

 

[woodster]

have you tried unscrewing it from the bulkhead and see how its made

 

[Ron20324]

I tried that change also, but on the Beneteau parts site you can buy new LED fixtures that will probably fit the same mounting holes. Mine did.

 

[WhiteNow]

I tried that change also, but on the Beneteau parts site you can buy new LED fixtures that will probably fit the same mounting holes. Mine did.

Only want to replace the bulb not whole fixture

 

[Ron20324]

Only want to replace the bulb not whole fixture

So did I- at first. Then, for only 17$ for a 4-LED fixture, i'd rather switch than fight. Part # 461140

 

[arf145]

That's a little different from my 331's swiveling fixtures of that type, but *as I remember it*, the "panel" to the left--the side without the switch--unclips and gives you access. I replaced all of the bulbs on those little fixtures with LED replacements from marinebeam.com a couple of years ago, so you'd think I would know for sure but...

 

[WhiteNow]

Thanks all took it off the bulkhead and end came off to provide access

 

[James Simmonds]

That's a little different from my 331's swiveling fixtures of that type, but *as I remember it*, the "panel" to the left--the side without the switch--unclips and gives you access. I replaced all of the bulbs on those little fixtures with LED replacements from marinebeam.com a couple of years ago, so you'd think I would know for sure but...

I was onboard my 331 today and noticed one of my swivel lights had come apart. Were you able to replace just the light and lense. If so what part did you use?