My only obstacle from a completely dry bilge seems to be water condensation building up in A/C unit (3) pans and draining passively into the main bilge. This has been the set up since owning my 49 and assume that is the way the system is set up from factory. Has anyone developed a set up to hook up small drain hoses to the hole bib on each A/C pan and then run into a dedicated sump, or, perhaps a way to connect to one of the vanity drains that passively exits a thru-hull below water line? When aboard and using the A/C, within a few hours, the dry bilge starts to build up water (fresh) and it would be great to divert that drain pan water overboard directly without entering the bilge first.
Thank you for any suggestions!
Thank you for any suggestions!