Re chromed winches

Status
Not open for further replies.

KD3PC

.
Sep 25, 2008
1,069
boatless rainbow Callao, VA
re chrome is only as good as the prep, if properly prepped and done correctly as good as new...if not...then yes they are slick as glass....
 
Jun 21, 2007
2,118
Hunter Cherubini 36_80-82 Sausalito / San Francisco Bay
Post if you find a re-chromer that charges a makes-sense-to-do cost. One of my cabin top winches is a great working Barient self-tailer. But much of the chrome has worn through exposing the bronze casting underneath. Looks like rust spots all over. Polishing helps for only a short while.

In the San Francisco Bay area, re-chroming cost when I've checked doesn't make sense to me solely for winch beautification reasons. Gone are the days when re-chroming was a common thing for car bumpers and hub caps, etc. Now only serious car or motorcycle restoration specialists or hobbyists have need. Also environmental compliance adds a lot of expense and time for the electroplating company.

Powder coating is another option?
 

caguy

.
Sep 22, 2006
4,004
Catalina, Luger C-27, Adventure 30 Marina del Rey
Post if you find a re-chromer that charges a makes-sense-to-do cost. One of my cabin top winches is a great working Barient self-tailer. But much of the chrome has worn through exposing the bronze casting underneath. Looks like rust spots all over. Polishing helps for only a short while.

In the San Francisco Bay area, re-chroming cost when I've checked doesn't make sense to me solely for winch beautification reasons. Gone are the days when re-chroming was a common thing for car bumpers and hub caps, etc. Now only serious car or motorcycle restoration specialists or hobbyists have need. Also environmental compliance adds a lot of expense and time for the electroplating company.

Powder coating is another option?
Powder coating is a great idea. Then you can even do them is colors.
 
Oct 26, 2005
116
Oday 28 Detroit/Grosse Pointe Park (O'Day 192, O'Day 28)
Anyone have any luck or advice re chroming a winch? I have been told that they become slick.
I don't know about the chroming part, but we've had the drums sandblasted when they were too slick. They taped off the chrome areas or something and just hit the drums. Maybe you could have that done after re-chroming.
 
Status
Not open for further replies.