On a 2004 Hunter 36, I plan to replace one of the shore power inlets. I noticed a black plastic protective cover in the cockpit locker, that completely covers the backs of both shore power inlets. It appears to be bonded to the locker (no visible screws).
I hope there is enough spare wire that I can remove the old inlet and pull wire through the hole, so the replacement can be done without prying off the plastic cover in the locker.
I'm trying to plan the job without access to the boat, so I'm hoping someone has done it and can confirm whether or not the plastic cover needs to be removed.
Thanks, Andy
I am certain that the cover must be removed. I believe there is a clamp that holds the wire in place which is part of the protective cover and will prevent you from pulling the wire through. Its not that difficult.
Bruce