Is 5 gallons enough to do the boat in two coats and maybe a 3rd on the bow and rudder?a. Wholesale.
b. It is sold in 5-gallon buckets. The product I had was in a 5-gallon bucket.
c. Everything for yachtsmen is more.
Painting Boat Bottom.....Copper Free Ablative Paint??
- Thread starter GeneraiT001
- Start date
Several times over. For a 36' boat figure about 4-5 liters per coat. Usually 2 coats are applied.
jssailem
SBO Weather and Forecasting Forum Jim & John
- Oct 22, 2014
- 23,539
I would split the cost of a 5 gallon pail between marina buddies, if possible. I've done that with all sorts of materials on different projects. Boat or otherwise. That's why I was suggesting talking to local fishermen or commercial boat owners. Who knows, they may end up with leftovers to do a 36ft sailboat.
I say this because you are in Newfoundland and I assume your town is a place, where that can happen. Great people IMO.
I say this because you are in Newfoundland and I assume your town is a place, where that can happen. Great people IMO.
Fixed that for you.a. Wholesale.
b. It is sold in 5-gallon buckets. The product I had was in a 5-gallon bucket.
c. Everything for yachtsmen is more.
That's what I expected. All doable with the right approach.
As for item 3... Just another reason the word "Yacht" gives me the creeps. Hehe
I'd never heard of Krypton (outside of Superman) and looked into it. Sounds like you could use it on the shaft and prop. Anyone do this? Does it work?