I just purchased an O'Day 222 that has a few issues, but the most troubling is that the sliding hatch was damaged some time in the past and needs to be repaired/replaced. It appears that the mast was dropped on it and cracked the glass on the aft edge and in the center. Water leaked in, probably froze and thawed many cycles, and now that I have the boat, I want to repair/replace it. I'm going to talk to Rudy at D&R Marine, but I've seen from earlier threads that he apparently doesn't have the molds for this model. Anyone have one kicking around or any thoughts on rebuilding this one would be appreciated. The two prices I got from boat repair facilities were both over $1200 and $2000, making the hatch worth about 1/2 the cost of the boat. Ideas?