Hello, I just purchased a 1979 MKII and when we went to drop the dinette table we found that the area notched out for the table was not aligned on both sides. when the table lined up on the stern side the Bow side was not lining up and was not on the same plane. For the table not to rock it would require a tapered shim about 1 1/4" on the walkway side to nothing on the far outside (port). Not to mention that it would not be flush with the seat.
Hoping someone has seen this before and can advise
Thanks Buzz The Restless wind
Hoping someone has seen this before and can advise
Thanks Buzz The Restless wind
Attachments
-
56.4 KB Views: 344