Mold and mildew during storage

Jun 14, 2010
2,487
Robertson & Caine 2017 Leopard 40 CT
@thinwater has written about this on SBO and Practical Sailor. While vinegar kills the spores and mold, it leaves behind a residue that might best be described as mold food. This particularly problematic on surfaces that are completely smooth, the vinegar remains in the nooks and crannies, the spores land and have a feast.

Check his blog, http://sail-delmarva.blogspot.com/search?q=formula+b for more info. Also check Practical Sailor.
OK I will follow up by spraying with Concrobium
 
Jun 14, 2010
2,487
Robertson & Caine 2017 Leopard 40 CT
Actually, if you follow the suggested links, Formula B is more effective and many, many times cheaper. It was developed for flood-damaged carpet.
Thanks. How much more effective? (I bought the Concrobium and I'm past the return period, so I'd prefer to use it.)
 

TomY

Alden Forum Moderator
Jun 22, 2004
2,769
Alden 38' Challenger yawl Rockport Harbor
We leave almost everything onboard (except sails) and open all the hatches and companionway. Everything below stays dry and well ventilated. This is the dry season for the boat.

All it takes is a cover that doesn't leak and adequate air flow through it, easier to achieve if you live close to the boat and can check the cover and adjust air flow.
Under cover.jpg
 
  • Like
Likes: Tom J
Apr 11, 2018
71
Hunter 340 Dowry Creek, NC
We have a 12 inch round dehumidifier that keeps the indoor temperature of the boat above the dew point
How does that little floor dehumidifier work? It seems not to do the job by collecting and disposing of water, so is it that it functions strictly as a low level heater? If so, what is its advantage over a small electric heater with an adjustable thermostat?
 
Feb 6, 1998
11,772
Canadian Sailcraft 36T Casco Bay, ME
What has the group had success with to prevent mold/mildew inside the boat during winter storage? The product I used (contains formaldehyde) is no longer made. Searching for a good alternative.

Thanks!
Air flow... Once covered I open the sink drain seacocks, place a fan in the companion way and crack the bow and midships hatches. Zero odor....
 
Mar 26, 2011
4,055
Corsair F-24 MK I Deale, MD
Thanks. How much more effective? (I bought the Concrobium and I'm past the return period, so I'd prefer to use it.)
A little more effective. Concrobium is good, so by all means, use it up!

Remember to use only the recommended concentrations and not to rinse it off. A carpet vacuum works well for fabrics.
 
Jan 24, 2017
672
Hunter 34 Toms River Nj
1) Two bags of plain charcoal, same stuff as used in your barbecue.
Paper towels on the bottom on a bucket then crush up a bag as best as you can, just large pieces and pour into the bucket. Place the buckets fore and aft. Helps with winter odors also.
2) as someone else posted put a colander over a bucket and add calcium into the colander. You can get the calcium from any pool or spa store.
3) fan plugged into a solar panel.
 
Jun 14, 2010
2,487
Robertson & Caine 2017 Leopard 40 CT
A little more effective. Concrobium is good, so by all means, use it up!

Remember to use only the recommended concentrations and not to rinse it off. A carpet vacuum works well for fabrics.
I bought the premixed formula. I also bought a mini fogger. My thoughts are to set the fogger on the finest mist with cabinets opened, and also direct it to the bilges then close up the boat overnight so it gets wafted into the nooks. (Will wear a chemical respirator mask)
https://www.amazon.com/gp/product/B001DDK79C
 
Oct 6, 2007
1,181
Hunter H30 1982 Chicago IL
Different climates require different approaches. I have found that a combination of desiccants and passive air circulation works best for me.

Here is my method for preventing cabin moisture and mildew during winter storage in Chicago:
1. The bilge is dried and all clothes, linens, liquids and food are removed from the boat.
2. All lockers in the cabin are emptied and left open.
3. All cushions are stood on edge for air circulation. PFD’s straddle the top edges of the cushions.
4. Eight DampRid buckets are deployed throughout the cabin to pull out moisture during the late fall & early spring shoulder months when humidity is higher. They have little or no effect in freezing weather and humidity is very low then.
5. Galley and lavatory sink seacocks are left open for ventilation and the head portlite is opened one inch after the shrink wrap goes on. There are also two small louvered vents in the aft coaming. This provides a surprising amount of air circulation in the winter cold when humidity is extremely low.
6. The shrink wrap gets at least four plastic vent inserts. My Boat is only 30 ft long. Longer boat. More vents.
7. No electric heaters or dehumidifiers are needed and I consider them a hazard when left unattended for long periods.

I do winter wellness checks on my boat about every four to six weeks or after particularly severe weather. The shrink wrap and cradle pads are more my concern then. The cabin is always fine and I try to minimize time in the cabin during cold weather because every breath adds humidity. I don’t really do winter boat projects unless it’s something I can take home.
 
Last edited: