Mast base wiring connections
- Thread starter ozlakemac
- Start date
No. I’m not sure that the acid adds that much weight, and pumping out and dealing with all that sulfuric acid seems like a bad idea.
The last time my 4D's failed, I was at my slip. Once I got them onto the cabin sole, I put a board on top of the companionway stairs and sprayed it with silicone lube. Not too slippery, just enough to help slide the 4D. This made it much easier to pull these heavy batteries up and out of the cabin. I took them to the dealer where I had bought them, and asked him to load test them. He came back to me and said they were fine. I re-installed them, and they were still no good.
I then took the time to rewire the battery compartment for golf cart batteries, and installed four. They hold a charge better than the 4D's ever did. I should have done the changeover years ago!
I then took the time to rewire the battery compartment for golf cart batteries, and installed four. They hold a charge better than the 4D's ever did. I should have done the changeover years ago!
Last edited: