A couple years back i purchased a Shark 24 that needed a bunch of interior work(completely stripped) but was in excellent sailing condition. But for the past little while i've noticed the cockpit sagging a little bit when stepped on...finally decided to squeeze way back to get a better look at the damage.
It's all along the STBD side of the cockpit deck, port appears to be fine. This is the worse of it, the rest is about 1/4 of that all the way to the edge of the cockpit deck. I had some leftover glass and resin from a previous job so i cleaned it off and added a couple layers to it, hoping to add some more strength. It doesn't sag as much after the quick fix. Should i continue to add a more layers or am i screwed and have to replace the whole deck.
It's all along the STBD side of the cockpit deck, port appears to be fine. This is the worse of it, the rest is about 1/4 of that all the way to the edge of the cockpit deck. I had some leftover glass and resin from a previous job so i cleaned it off and added a couple layers to it, hoping to add some more strength. It doesn't sag as much after the quick fix. Should i continue to add a more layers or am i screwed and have to replace the whole deck.
