HI All,
I am having my boat in Phuket , a hunter legend 37.5 with extensive refit in Phuket. All sea cocks were changed, along with through hulls, P bracket and cutless bearing, and also installed a PSS seal.
The rudder was also dropped and the bottom seal changed, top or upper one was ok.
First problem encountered on boat entering water - serious leak as seen in the picture. The hole shown was cut to try to locate the leak.
Appreciate any advise as to where this could be coming from. this is just in an area below the engine coming from the back ,
exhaust hose check and is ok.
Also appreciate any assistance to get the tension of the rigging as this too as been renewed.
My biggest nightmare is the leak and is also costing me a lot as need to trouble shoot. pls help.
rgds
fabian
I am having my boat in Phuket , a hunter legend 37.5 with extensive refit in Phuket. All sea cocks were changed, along with through hulls, P bracket and cutless bearing, and also installed a PSS seal.
The rudder was also dropped and the bottom seal changed, top or upper one was ok.
First problem encountered on boat entering water - serious leak as seen in the picture. The hole shown was cut to try to locate the leak.
Appreciate any advise as to where this could be coming from. this is just in an area below the engine coming from the back ,
exhaust hose check and is ok.
Also appreciate any assistance to get the tension of the rigging as this too as been renewed.
My biggest nightmare is the leak and is also costing me a lot as need to trouble shoot. pls help.
rgds
fabian
Attachments
-
828.6 KB Views: 276