I am attempting to replace the two "jib sheet blocks" on may 77' Oday 22, they are spirng loaded and appear to be of one piece construction. This basic item has been hard to locate, any help is greatly appreciated.
Jib sheet blocks
- Thread starter Steve Morris
- Start date
- Status
Contact Rudy
at D&R Marine at www.odaysailboats.com. He should have something taht would work. Reasonable prices. Jeff
at D&R Marine at www.odaysailboats.com. He should have something taht would work. Reasonable prices. Jeff
Scheafer Marine has exact replacements(03-62,08-62, 706-62, 505-62, 10-62UC) You can probably order them for less thru Sailnet.
Schaefer Marine
The nylon roller on my "stand-up" block (That's what the jib block is called) is partially broken. At some point I will have to replace it as well. I recently had Shaefer Marine repair the bearings in my roller furling unit and in the process, I discovered that most of the hardware on my 25' 1983 is Schaefer Marine. They were very helpful and sent me a catalog with prices that included the blocks that you need with full specifications.
The nylon roller on my "stand-up" block (That's what the jib block is called) is partially broken. At some point I will have to replace it as well. I recently had Shaefer Marine repair the bearings in my roller furling unit and in the process, I discovered that most of the hardware on my 25' 1983 is Schaefer Marine. They were very helpful and sent me a catalog with prices that included the blocks that you need with full specifications.
Stand-Up Swivel Block's
Thanks Ugadawg, I found exactly the item you suggested on Reply #2, the one I ordered is item # SCH03-62, the Schaefer 37mm Stand-Up Swivel Block. Thanks for your assistance.
Thanks Ugadawg, I found exactly the item you suggested on Reply #2, the one I ordered is item # SCH03-62, the Schaefer 37mm Stand-Up Swivel Block. Thanks for your assistance.
- Status