I think I have isolated the leak I am getting into the bilge to the lower anchor locker drain. It seems to be sealed well on the inside of the locker but when I dump water into the locker, there is leakage from between the anchor locker liner and the outer hull. Then this eventually drains into the bilge. The last big storm we had the bilge pump cycled over 100 times with lots of rain and some pitching on the mooring. When its not rained, the bilge counter reads 0 for days on end. It appears there is a "tube" of some sort that runs from the locker to the clamshell fitting on the hull.
Has anyone undergone this repair and what type of tubing or hose did you use and how did you access it and replace it? Any tips would be appreciated. Thanks in advance.
Smokey
Has anyone undergone this repair and what type of tubing or hose did you use and how did you access it and replace it? Any tips would be appreciated. Thanks in advance.
Smokey