Any ideas? Riveted to mast so no way to get at the back of it without a lot of work.
Attachments
-
43.6 KB Views: 250
Yes, The pin actually screws into the tube part. Pop it into place, unscrew the pin and use a machine screw to secure your light. McMaster Carr has them IIRC.I have only been able to find rivets that have 1/2" gripping and the distance from the face of the fixture to the face of the groove is about 1/2" meaning I think I need something in the 3/4" range. 3/16" are fine but I can't find them anywhere here.
Ron, do you mean the rivets are pre-threaded on the inner cavity?
Dan
https://www.grainger.com/category/f...Z1z0nmz5/Ntt-rivets?sst=subset&ts_optout=trueI have only been able to find rivets that have 1/2" gripping and the distance from the face of the fixture to the face of the groove is about 1/2" meaning I think I need something in the 3/4" range. 3/16" are fine but I can't find them anywhere here....
If he wasn't in Canada, that would have been my first call too. That's where I get mine.McMaster Carr