Hey guys, new Aussie owner on 2003 Hunter 326. Cannot find this valve! Manual indicates that it's below the Nav table end of the battery compartment but I can't see it! Surely I don't have to remove a battery to get access! Help needed
On my 326 its only ~2 feet or less away. My intake valve is in the blue circle area. Pretty sure that is where Stuendan should look.That's a looooong flush water inlet line! You can reduce it to less than 2' by rerouting it to tee into the head sink drain line.
--Peggie
Yea, the schematics are definitely wrong in the manual. I have spend time over the years figuring out all the plumbing, still working on the electrical systems, that do not match up. Some even on the other side of the boat from what the drawings show. Oh well, thats what makes if interesting and why this site is so helpful.So THAT's why you labelled it "look here!" So what's that long black line that has a vented loop in it that runs from the toilet all the way to #2, which--if I read the list correctly--is the toilet intake thru=hull? And what's connected to the other end of what appears to be corrugated hose that seems to go through the toilet seat?
--Peggie
I'm aware of that. I am also aware that often schematics are "simplified" to make them easy to follow- especially electrics.Take another look at sailingmyers posts, Ron...you'll see that his toilet intake thru-hull may already be only a couple of feet from the toilet. --Peggie
It's all good. I would be interested to find out what you do find once you can get back. Stay Safe. Feel free to reach out for other questions.Oh damn - sorry Sailingmyers, the thankyou was meant for you!