C
Capt. Paul
My head on my Hunter has worked great for years... But after a charter today I went to clean up for the next one and there was some liquid in the bottom. I pumped it dry and I noticed the pump was getting stiff. I continued to "flush" mode and it stopped. I could feel the pressure and didn't want to continue on.I noticed it start to drip under the hose connection under the dry/flush knob.I stopped dead in my tracks knowing that I have a 1/2 day tomorrow and a sunset sail after that.After looking around the room, I noticed that a box of Kleanex was empty. I think there was 4 or 5 left in the box. So maybe someone flushed them down the head.CAN ANYONE TELL ME WHERE TO LOOK FIRST? I've never had that head apart and it is plumed with a Y valve under the head. One side goes to the tank and the other side goes to a Y valve under the sink. On the second Y valve, one side goes to the sea and the other side goes into the wall and I'm not sure where that goes.If someone can tell me what hose or part needs to be looked at first and then second and then third, I would be very, very thankful.This is not a good weekend for this, but as I think about it, there is not a good weekend for this, but the charter goes out at 11 am so I'm deep in sh**.Thanks for your help and I'll do what I can to help you in the furture.Capt. Paul Wests/v Magic WindHunter 31, 1986, Hull #714