Hey folks, I'm planning to pull the mast on my 1984 h27 to rewire and resolve compression post issues, but never having pulled the mast before, I'm not sure whether to pull the mast with the roller furling still attached, or to tie a line on the top of the roller furling and ease down before pulling the mast. What the advise? Thanks Tony
More details - boat will be in the water and the boat yard will use a tall forklift to raise and lower the mast. The roller furling is a Furlex 100 and I'm concerned about the aluminum extrusion bending or breaking.
More details - boat will be in the water and the boat yard will use a tall forklift to raise and lower the mast. The roller furling is a Furlex 100 and I'm concerned about the aluminum extrusion bending or breaking.