removehtml]I`ve been reading up on Raymarine S1 Wheel Autopilot, it says its interface inputs/outputs: are seatalk, NMEA,??? I`m intersted in the Garmin 545 or 440 model GPS`s . They both say(read) The interface inputs/outputs: CANet,NMEA. What does the ( NMEA ) mean? Does that mean the S1 Wheel autopilot can be used with the Garmin 545, 440 GPS . And Or others brands with the same interface inputs/outputs? any information would be a great help, CHET. Error: Error: expected [/URL], but found [/removehtml] instead[/removehtml]
Garmin GPS to Raymarine Autopilot question
- Thread starter Chet7135
- Start date
- Status
Garmin
customer support... is very helpful/knowledgeable if you have specifics. You can get there from Garmins website.
customer support... is very helpful/knowledgeable if you have specifics. You can get there from Garmins website.
Thanks for all
the great infor, guys! and Paulj , the link you sent has alot of good information in it. Since it sounds like its posible to do this converion. buying a garmin this year and then later down the way install autopilot if I want to, is what I wanted to be able to do. Thanks everyone.
the great infor, guys! and Paulj , the link you sent has alot of good information in it. Since it sounds like its posible to do this converion. buying a garmin this year and then later down the way install autopilot if I want to, is what I wanted to be able to do. Thanks everyone.
- Status