fuel fill hose
- Thread starter healeyman
- Start date
- Status
The standard size for all tank fill hoses is 1.5" ID
ID = Inner diameter. If you're in doubt, check the OD (Outer Diameter) of the hose barb on the deck fill fitting.
Btw, all hose sizes refer to the inner diameter. Hose barbs/fittings sizes are always the outer diameter.
ID = Inner diameter. If you're in doubt, check the OD (Outer Diameter) of the hose barb on the deck fill fitting.
Btw, all hose sizes refer to the inner diameter. Hose barbs/fittings sizes are always the outer diameter.
Re: The standard size for all tank fill hoses is 1.5" ID
Peggy, Thanks for your reply and advise... as a new Hunter owner my learning curve is vertical. I plan to do as much of the work that I can and doctument the experience. Hopfully I can 'give back' one of these days.
Dave
Peggy, Thanks for your reply and advise... as a new Hunter owner my learning curve is vertical. I plan to do as much of the work that I can and doctument the experience. Hopfully I can 'give back' one of these days.
Dave
- Status