EZ steer feedback

S

sailmaster39

.
May 29, 2011
116
Hunter H 240 rehoboth beach , De
Looking for feedback / advice ,good and bad for the EZ Steer hook up between rudder and outboard motor.
Is it worth the investment.

thanks in advance
Richard
 
Kermit

Kermit

.
Jul 31, 2010
5,721
AquaCat 12.5 17342 Wateree Lake, SC
I bought the Panther connector from Cabela's and am very happy with it.
 
J

jcrumpley

.
Sep 1, 2009
61
2006 Hunter 25 Lake Travis, Texas
I use the Cabella's version as well. It was well worth it for my boat. My turning radius coming into my marina is greatly reduced. I can also steer at slower speeds with it than without it. I was able to hook mine up so that the electric tilt outboard can be tilted without removing the connecting rod. If I had to take it on and off, I probably wouldn't use it.
 
Kermit

Kermit

.
Jul 31, 2010
5,721
AquaCat 12.5 17342 Wateree Lake, SC
I typically remove the rod while sailing. Not hard to do but it increases the risk of losing it overboard. I've sailed with it on with no problems, too.
 
S

sailmaster39

.
May 29, 2011
116
Hunter H 240 rehoboth beach , De
ez steer

jcrumpley said:
I use the Cabella's version as well. It was well worth it for my boat. My turning radius coming into my marina is greatly reduced. I can also steer at slower speeds with it than without it. I was able to hook mine up so that the electric tilt outboard can be tilted without removing the connecting rod. If I had to take it on and off, I probably wouldn't use it.
Click to expand
Other than the rod from Cabella`s , what other components did you buy and where did you buy them.
Thanks
Richard
 
Kermit

Kermit

.
Jul 31, 2010
5,721
AquaCat 12.5 17342 Wateree Lake, SC
It comes all packaged. You just need a drill and a hacksaw. And maybe a tape measure and a pencil. Nothing else to buy.

Oh wait! Bolts. You will need bolts. Get them after you get the rod.
 
You must log in or register to reply here.

Top Bottom